Agni Fire Alarm System

Approx. Rs 1,375 / PieceGet Latest Price

Product Details:

Accepts all Context Plus Xpert card stlyle smoke and heat detectors. It is a zero insertion force base with dual finger receptacles of stainless steel into which the detector terminals slide. Cable connections of up to 2.5mm diameter are made via captive cable clamps.

 

Includes four double terminals (L1 = – line IN and OUT; L2 = + line IN and OUT; +R = remote LED positive supply; -R = remote LED negative supply) and one isolated single terminal that can be used to provide continuity of an earth or shield. XPERT cards, are supplied with all bases.

 

Consult the coding guide to determine which pips are to be removed. Pre-printed and pre-punched address cards that save time and increase accuracy during commissioning are available in sets (part number: 45682-127). The base has a ‘one way only’ fit and detectors can be locked into the base by a grub screw with the aid of a 1.5mm hexagonal driver.

20D Isolating Base, XPERT style, 45681-321IMC or 45681-284IMC

The Context Plus XP95 20D isolating base senses and isolates short circuit faults on loops and spurs. The base is loop powered, polarity sensitive and accepts the XPERT card to set the associated device address. In short circuit conditions, the integral yellow LED is illuminated. The detector associated with the base remains active under short circuit conditions. Power and signals to the affected section are restored automatically when the fault is cleared. Under normal operating conditions, a low impedance is present between the – IN and – OUT terminals of the base, so that power and signals pass to the next base in the line. If a short circuit or abnormally low impedance occurs, the fall in voltage is sensed and the base isolates the negative supply in the direction of the faul. In applications where it is not necessary to use an isolating base for each detector, up to twenty devices (detectors and interfaces) may be installed between isolating bases, provided that their total switch-on surge current does not exceed 20mA. Circuits may include spurs, which should be connected between the spare –OUT terminal and the base L1 terminal. Spurs connected in this way appear directly across the loop on the output side of the isolating base. Short-circuit faults on the spur therefore short circuit the loop and vice versa. The effect of such short circuits must be taken into account in the system design and may require the use of extra isolating bases. 

Approx. Rs 18,500 / PieceGet Latest Price

Product Details:

Water Leak Detection Panel provides round the clock protection against unwanted water leakage with the help of water detection cable like sontay.

The water leak detection cable will be placed in distributed locations inside server room/Data Centers. These will be mounted on floors with provision to adjust the sensing of thin film of water. Each Cable is wired to the control panel. In the control panel, the water leak from each cable is monitored and in case of detection from any cable, an alarm is initiated. This alarm will be on as long as the water leak present across the cable.

In the control panel, the sensor locations are denoted by zones and are represented by LED’s. In case of water leak in any zone, the RED LED for the zone glows thereby indicating the water leak. Simultaneously an alarm is also initiated. It has also a Test Button in its front panel for testing the water leak conditions. Reset button in the front panel, resets the alarm provided water leak is removed across the cable and also if Test button is pressed.

The control system also provides potential free relay contacts for each Zone future purpose.

Approx. Rs 15,600 / PieceGet Latest Price

Product Details:


Oriel 8Z Control Panel.

Approx. Rs 3,750 / PieceGet Latest Price

Product Details:


GN625-N Agni Fire Alarm Gas Detector

Approx. Rs 6,250 / PieceGet Latest Price

Product Details:

Features:

• Five pieces of up-to date alarm message can be scroll to display simultaneously.
• Inquiring 100 pieces of up-to-date records (including alarm message and indicate message)
• A normal open/close output and +12V DC output are provided to control other devices
• (e.g. startup alarm siren, alarm light, alarm linkage etc.)
• Provide a set of audio signal output, which can connect directly with 8Ù15W passive trumpet
• and active sound box, and build-in trumpet loses affection automatically.(optional)
• Micro printer can print 5 pieces of alarm records simultaneously, and also can print them
• one by one.(optional)
• Manage center online can be connected with computer by RS232 interface and ready to display and
• manage the alarm message.
• The internal or external backup battery are optional. There is protection for over-charged or
• over-discharged and also low power alert.
• Rechargeable backup battery ( 12V 7Ah) is optional.
• Dial module is optional.
• Print module is optional.
• Real Time Module is optional.

Approx. Rs 2,250 / PieceGet Latest Price

Product Details:

Designed to sit on the Context Plus loop, the addressable Vantage horn sounder offers the following features:-

Straight forward DIL switch addressing

• Attractive low profile design
• Excellent lateral sound distribution
• Three Evacuate tones (continuous, warble or sweep) and one Alert tone
• High (100dB @ 1m) and low (94dB @ 1m) volume settings
• A BS5839 Part 1 2002 Clause 12.2.2 compliant locking facility
• A ‘quick-fit’ bayonet fixing arrangement
• ‘Master’ or ‘shadow’ mode operation (allows multiple shadow sounders to be
• given the same ID address as one ‘master’ sounder, a useful feature on heavily
• Populated systems and to give synchronised sounding)
• A group addressing facility allowing multiple sounders to be activated
• Simultaneously

IP43 rated shallow and IP65 rated deep base versions are available

Approx. Rs 11,500 / PieceGet Latest Price

Product Details:


Features:

• Designed to comply with the latest versions of EN54 parts 2, 4 and 13
•  Communication protocol – Apollo XP95/Discovery
• Three cabinet sizes – standard (2 or 4 loops), medium (2, 4, 6 or 8 loops) and large
• (2, 4, 6 or 8 loops)
•  3A or 5A full EN54-4/A2 PSU and battery charger included
•  Onboard mini-USB connection to connect a PC running programming software
•  Two RS 232 ports – one dedicated to a 40 column thermal printer (optional),
• one for ancillary devices such as ESPA protocol alphanumeric pagers / DECT
• telephone systems
•  4.3 inch, 472 x 248 pixel, 24 Bit, 16 M colour, resistive LCD touchscreen (larger
• touchscreen available to special order)
•  40 characters of custom text per device
•  Separate distinct LEDs for mandatory EN54 indications plus programmable LEDs
•  Real time clock with built in and automatic daylight saving time/backup PSU
•  Standard upload download software includes facility to upload company logos – even
• from a simple .jpg file from a camera
•  Secure fault tolerant network as standard (needs separate network driver PCB)
•  Full on-screen QWERTY keyboard
•  Day/night sensitivity
•  Three access levels – general, authorised user and engineer
•  Four programmable 1A sounder circuits (3A max total)
•  Directly connects to DIN standard fireman’s Interface (IFAM-FAT/FBF).
• Interface for Keybox units and ATU.
•  Up to 200 separate LEDs per panel, programmable as Fire Zonal LEDs or other
•  Up to 64 eight loop peer to peer panel network capacity (max. distance between
• each ‘node’ = 1KM)
• Fault tolerant network drivers (Hi-Net)
•  Flush and surface ‘Compact Controllers’
•  Up to 10,000 programmable and indicatable system zones
•  Greater than 100,000 addressable device system capacity
•  20,000 event memory of all fire and fault and system events – all filterable
•  Selectable Language
•  ‘Slide In’ label system on custom moulded bezels for customizable language
• labels/custom description of zones and programmable LEDs. Common word processor
• templates available with software
• 4 Isolated internal/external RS485 peripheral bus for connection of ancillary
• peripheral PCBs (15 PCBs max per panel)
•  Up to 16 GB (2 GB as standard) internal SD card memory (removable micro SD card).
• SD card can be programmed off site if required
•  Dedicated port for Ethernet connection (requires plug on TCP/IP PCB) to allow for
• Internet control and monitoring
•  Onboard printer option
•  Modular Construction
•  Up to 18 Ah batteries in standard cabinet, up to 38 Ah in larger cabinets

Panel appearance and specifications subject to confirmation and/or change without prior notice. Please contact our sales desk for an up-to-date list of panel features, part numbers and release dates.

Approx. Rs 8,500 / PieceGet Latest Price

Product Details:

Basic Features:

• 2×16 characters LCD display (4×20 optional).
• Separate monitoring of MRU MAU.
• 0-3 minute time delay facility for auto release and manual release.
• Event logging real time clock.
• Use for various gas release system i.e. FE 227 ea, Inergen, Co2
• Lamp Test Features
• Complete with integral power supply battery charger for
• SMF Battery
• Maximum No. of Detector in each zone is 25
• LCD and LED indication for open, short circuit, isolate.
• Fire in each zone
• LCD indication for Timer On and Gas Discharge

Approx. Rs 6,500 / PieceGet Latest Price

Product Details:

Features :

• Totally Micro controller Based System
• 2 – Line, 16 – Character LCD With Backlight
• 20 Telephone Number with Speech
• 20 Seconds pre recorded message
• Telephone Number Check Facility
• Keypad Access Code Only After Correct Enter of Existing User Code
• Program Mode Can only Be Accessed by the Keypad

Approx. Rs 650 / PieceGet Latest Price

Product Details:

Features :

• 24 / 12 Volt DC operation
• High sound output with low current consumption

Approx. Rs 1,250 / PieceGet Latest Price

Product Details:


Photo-luminescent, energy saving (glow-in-dark) type Exit Sign Board. Exit sign board made on imported photo-luminescent sheet, pasted on 1mm thick aluminum sheet, monogram / signages and inscriptions made by way of computerized Vinyl Cutting and lamination.

Approx. Rs 1,550 / PieceGet Latest Price

Product Details:

Context Plus XP95 multisensor detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value.

The multisensor construction is similar to that of the optical detector but uses a different lid and optical mouldings to accommodate the thermistor temperature sensor. The sectional view (below) shows the arrangement of the optical chamber and thermistor.

The signals from the optical smoke sensing element and the temperature sensor are independent, and represent the smoke level and the air temperature respectively in the vicinity of the detector. The detector’s microcontroller processes the two signals. The temperature signal processing extracts only rate of rise information for combination with the optical signal. The detector will not respond to a slow temperature increase – even if the temperature reaches a high level. A large sudden change in temperature can, however, cause an alarm without the presence of smoke, if sustained for 20 seconds.

The processing algorithms in the multisensor incorporate drift compensation. The control panel must not have a drift compensation algorithm enabled.

The sensitivity of the detector is considered the optimum for most general applications since it offers good response to both smouldering and flaming fires.

Note: In situ testing of the multisensor should be carried out as for smoke detectors.

Approx. Rs 2,549 / PieceGet Latest Price

Product Details:

Features:

• Front Protection Glass Cover
• Unbreakable Glass
• No / NC Potential Free Contacts

Approx. Rs 6,500 / PieceGet Latest Price

Product Details:

Specifaction:

• Designed to comply with the latest versions of EN54 parts 2, 4 and 13
•  Communication protocol – Apollo XP95/Discovery
• Three cabinet sizes – standard (2 or 4 loops), medium (2, 4, 6 or 8 loops) and large
• (2, 4, 6 or 8 loops)
•  3A or 5A full EN54-4/A2 PSU and battery charger included
•  Onboard mini-USB connection to connect a PC running programming software
•  Two RS 232 ports – one dedicated to a 40 column thermal printer (optional),
• one for ancillary devices such as ESPA protocol alphanumeric pagers / DECT
• telephone systems
•  4.3 inch, 472 x 248 pixel, 24 Bit, 16 M colour, resistive LCD touchscreen (larger
• touchscreen available to special order)
•  40 characters of custom text per device
•  Separate distinct LEDs for mandatory EN54 indications plus programmable LEDs
•  Real time clock with built in and automatic daylight saving time/backup PSU
•  Standard upload download software includes facility to upload company logos – even
• from a simple .jpg file from a camera
•  Secure fault tolerant network as standard (needs separate network driver PCB)
•  Full on-screen QWERTY keyboard
•  Day/night sensitivity
•  Three access levels – general, authorised user and engineer
•  Four programmable 1A sounder circuits (3A max total)
•  Directly connects to DIN standard fireman’s Interface (IFAM-FAT/FBF).
• Interface for Keybox units and ATU.
•  Up to 200 separate LEDs per panel, programmable as Fire Zonal LEDs or other
•  Up to 64 eight loop peer to peer panel network capacity (max. distance between
• each ‘node’ = 1KM)
• Fault tolerant network drivers (Hi-Net)
•  Flush and surface ‘Compact Controllers’
•  Up to 10,000 programmable and indicatable system zones
•  Greater than 100,000 addressable device system capacity
•  20,000 event memory of all fire and fault and system events – all filterable
•  Selectable Language
•  ‘Slide In’ label system on custom moulded bezels for customizable language
• labels/custom description of zones and programmable LEDs. Common word processor
• templates available with software
• 4 Isolated internal/external RS485 peripheral bus for connection of ancillary
• peripheral PCBs (15 PCBs max per panel)
•  Up to 16 GB (2 GB as standard) internal SD card memory (removable micro SD card).
• SD card can be programmed off site if required
•  Dedicated port for Ethernet connection (requires plug on TCP/IP PCB) to allow for
• Internet control and monitoring
•  Onboard printer option
•  Modular Construction
•  Up to 18 Ah batteries in standard cabinet, up to 38 Ah in larger cabinets

Panel appearance and specifications subject to confirmation and/or change without prior notice. Please contact our sales desk for an up-to-date list of panel features, part numbers and release dates.

Approx. Rs 5,500 / PieceGet Latest Price

Product Details:


The Context Plus XP95 Zone Monitor powers and controls the operation of a zone of up to 20 Series 65 conventional fire detectors from a loop of Context Plus analogue addressable detectors and interfaces.

Features:
The Zone Monitor is factory preset to return an analogue value of 16 when all detectors on the zone are in quiescent state and 64 when a detector changes to the alarm state. The Zone Monitor latches in the alarm state. 5.1k! end-of-line resistor is fitted to detector cables for open- and short-circuit faults. Alternatively, an active end-of-line monitor may be used in conjunction with diode bases and a capacitor of up to 50μF fitted at the Zone Monitor wiringterminals.In either case an analogue value of 4 is transmitted during open- or short-circuit faults. The Zone Monitor is fitted with a bi-directional short circuit isolator and will be unaffected by loop short circuits on either the loop input or loop output.ELECTRICAL CONSIDERATIONSThe Zone Monitor is loop powered and operates at 17–28V DC with protocol pulses of 5–9V.MECHANICAL CONSTRUCTIONThe Zone Monitor is supplied with a backbox for surface mounting, and is also available without the backbox for flush mounting. Both versions are for indoor use only.Two LEDs, one red and one yellow, are visible through the front cover of the enclosure. The red LED is illuminated to indicate that a fire alarm condition has been detected on the zone wiring.The yellow LED is illuminated whenever the built-in isolator has sensed a short circuit loop fault.NOTES ON USE1. Zone voltage is regulated to 19 ± 1V for any loop voltage greater than 22V. If the loop voltage falls below 22V, the zone voltage is approximately 1.5V below the loop voltage. It is important to ensure that under worst-case conditions, the zone voltage is above the minimum operating voltage for the conventional detectors.2. Alarm conditions are latched internally by the Zone Monitor. It is therefore necessary to reset the alarm even if non-latching conventional detectors are used.3. Manual call points can be located at any point in the zone wiring if active end-of-line monitoring with diode detector bases is used. If a 5.1k! resistor is used for monitoring, manual call points must be connected between the Zone Monitor and the first detector

Approx. Rs 950 / PieceGet Latest Price

Product Details:


AD-218 Series photoelectric smoke detectors are designed in accordance with UL-217, EN-146045 IC & BS 5446 and manufactured under the best quality control. The series alarm are adopted the reliability UL-certificated infrared 0components. AD-218 series alarms also act as a smoke sensor and/or a 135F heat detector at the same location. 

Approx. Rs 750 / PieceGet Latest Price

Product Details:

FEATURES :

• 24 / 12 Volt DC operation
• High sound output with low current consumption

Approx. Rs 7,500 / PieceGet Latest Price

Product Details:


Features:

• Complies to IS 2189:1999 and Tested by ERTL (N) System Sensor.
• 2 x 16 character backlit LCD display. (4 x 20 character, optional)
• 64 / 128 / 256 Events logging facility with real time clock and keypad. (optional)
• 2 Wire Communication facility via RS 485 Port. (For Repeater Panel) (optional)
• BMS attachment
• Lamp test features.
• Complete with integral power supply and battery charger for SMF battery.
• NO/NC contacts for both fire and fault.
• Switches to enable on board operation.
• LCD and LED Indication for open, short circuit, Isolate, Fire in each zone.
• Maximum nos. of Detectors in each zone is 25

Approx. Rs 450 / PieceGet Latest Price

Product Details:


Manual Call Point is a device for the manual initiation of an alarm. Manual fire alarm activation is typically achieved through the use of a pull station (term used in USA & Canada) or call point (term used in Europe, Australia, and Asia), which then sounds the evacuation alarm for the relevant building or zone.

Approx. Rs 2,250 / PieceGet Latest Price

Product Details:

The Context Plus XP95 input/output unit provides two voltage-free, single pole, change-over relay outputs, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.

Features:

Compliant with EN54-17 18 (2005), the Input/Output Unit supervises one or more normally-open switches connected to a single pair of cables. It is set to return an analogue value of 4 in the event of an open or short-circuit fault and 16 during normal operation. The status of the inputs is reported by means of two input bits. The change-over contacts are operated by an output bit.

The Input/Output unit is fitted with a bi-directional short-circuit isolator and will be unaffected by loop short-circuits on either loop input or output.

Electrical Consideration:

The unit operates at 17-28V DC with protocol voltage pulses of 5-9V. No electrical supply greater than 50V AC rms or 75V DC should be connected to any terminal.

Designed for indoor use only it includes four LEDs, two red and two yellow, which are visible through the front cover of the enclosure. One red LED is illuminated to indicate that the relay is set. The second red LED is illuminated to indicate that the switch input is closed. One yellow LED is illuminated whenever a fault condition (open or short circuit) has been detected. The other LED is illuminated whenever the built-in isolator has sensed a short-circuit loop fault. The enclosure is moulded from white self-extinguishing polycarbonate.

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

The addressable Vantage Combi is based on our well proven Vantage horn sounder but features an additional built-in flashing beacon that flashes once a second in evacuate or alert mode. Its features include:-

Straight forward DIL switch addressing

• Attractive low profile design
• Excellent lateral sound distribution
• Three Evacuate tones (continuous, warble or sweep) and one Alert tone
• High (100dB @ 1m) and low (94dB @ 1m) volume settings
•  A BS5839 Part 1 2002 Clause 12.2.2 compliant locking facility
• A ‘quick-fit’ bayonet fixing arrangement
• Master or ‘shadow ’ mode operation
• A group addressing facility

IP43 rated shallow and IP65 rated deep base versions available

 

Approx. Rs 1,850 / PieceGet Latest Price

Product Details:

The addressable VXB beacon utilises the latest developments in surface mount LED technology to provide a cost-effective addressable beacon that is big on visibility but low on current consumption.

Flashing once a second in evacuate or alert mode, its features include:-

• Straightforward DIL switch addressing
•  Attractive low profile design
•  A ‘quick-fit’ bayonet fixing arrangement
• A typical alarm current of just 3mA @ 24V
• Master or ‘shadow’ mode operation
•  A group addressing facility
•  A BS5839 Part 1 2002 Clause 12.2.2 compliant locking facility

Approx. Rs 4,500 / PieceGet Latest Price

Product Details:



The addressable Vector base sounder is designed for use as part of an interior sounder/detector base combination. Its features include:-

•  Attractive low profile design
• Three Evacuate tones (continuous, warble or sweep) and one Alert tone
• Volume adjustable from 91dB downwards
•  ‘Master’ or ‘shadow ’ mode operation (allows multiple shadow sounders to be
• given the same ID address as one ‘master’ sounder, a useful feature on heavily
• populated systems and to give synchronised sounding)
•  An IP42 rated enclosure

 

Optional red or white lids are also available for stand-alone use (see below for part numbers). 

Approx. Rs 550 / PieceGet Latest Price

Product Details:

Features :

• Available for flush or Surface Mounting.
• Suitable for majority of conventional Fire
• Alarm System.
• Front protection glass cover.
• Unbreakable glass ABS plastic body

Approx. Rs 550 / PieceGet Latest Price

Product Details:

Features :

• Front Protection Glass Cover
• Unbreakable Glass
• No / NC Potential Free Contacts

Approx. Rs 4,500 / PieceGet Latest Price

Product Details:

Features:

• Complies to IS 2189:1999 and Tested by ERTL (N) System Sensor.
• 2 x 16 character backlit LCD display. (4 x 20 character, optional)
• 64 / 128 / 256 Events logging facility with real time clock and keypad. (optional)
• 2 Wire Communication facility via RS 485 Port. (For Repeater Panel) (optional)
• BMS attachment
• Lamp test features.
• Complete with integral power supply and battery charger for SMF battery.
• NO/NC contacts for both fire and fault.
• Switches to enable on board operation.
• LCD and LED Indication for open, short circuit, Isolate, Fire in each zone.
• Maximum nos. of Detectors in each zone is 25

Approx. Rs 650 / PieceGet Latest Price

Product Details:


A manual call point is a device which enables personnel to raise an alarm in the event of a fire incident by pressing a frangible element to activate the alarm system.

Approx. Rs 950 / PieceGet Latest Price

Product Details:

AD-218S Series photoelectric smoke detectors are designed in accordance with UL-217, EN-146045 IC BS 5446 and manufactured under the best quality control. The AD-218S series alarm are adopted the reliability UL-certificated infrared components.

Overview

• Omniview LED for 360 Deg. Visibility
• Front Detection Smoke Chamber
• Hush Button
• Lockable Standard Base

Approx. Rs 5,500 / PieceGet Latest Price

Product Details:

The ionisation chamber system is an inner reference chamber contained inside an outer smoke chamber. The outer smoke chamber has smoke inlet apertures that are fitted with an insect resistant mesh.

The radioactive source holder and the outer smoke chamber are the positive and negative electrodes respectively. An Americium 241 radioactive source mounted within the inner reference chamber irradiates the air in both chambers to produce positive and negative ions. On applying a voltage across these electrodes an electric field is formed. The ions are attracted to the electrode of the opposite sign, some ions collide and recombine, but the net result is that a small electric current flows between the electrodes. At the junction between the reference and smoke chambers is the sensing electrode that is used to convert variations in the chamber currents into a voltage. When smoke particles enter the ionisation chamber, ions become attached to them with the result that the current flowing through the chamber decreases. This effect is greater in the smoke chamber than in the reference chamber and the imbalance causes the sensing electrode to go more positive. 

Approx. Rs 550 / PieceGet Latest Price

Product Details:

Model QS-300-RB smoke detector uses a specialized smoke chamber design, which could sense the presence of smoke particles produced by fast combustion or slow smoldering fire.

The QS-300-RB detectors have an external relay, provides Single/Double sets of volt-free changeover (form C) contacts change state when the detector signals an alarm.

The detector will work with most modern fire alarm control panels???security systems, and meets the requirements of UL 268 and EN 54-7.

Features:

• 4-Wire operation 
• Wide operating voltage
• External alarm relay output
• Advanced electronic technology
• Proven detection performanceDesigned to meet approvals worldwide (e.g. UL LPCB CE)